Material Characterisation Services
Moldex3D helps global users build their proprietary material database. According to common production needs, each company typically requires less than 10~15 grades of materials. Thus, it’s generally very cost-effective to build a proprietary database for internal utilisation. Furthermore, it’s always highly recommended to have correct and accurate material data for reliable CAE analyses. Please fill up the request form and send it to support@s4innovation.com for a detailed quotation. A special discount for Moldex3D users is available.Moldex3D provides the following characterisation services for both thermoplastic and thermoset.
Thermoplastic
Shear Viscosity
The shear viscosity is measured by capillary viscometer (Model: Gotech CR- 6000 and Gottfert Rheograph 25) at three different processing temperatures and a reasonable range of shear rates. Shear viscosity is crucial to calculating sprue pressure, melt front advancement, clamping force…etc. Shear viscosity is necessary for all Moldex3D analyses. Shear viscosity measurement with Bagley correction is available upon request.
Thermal Conductivity
The thermal conductivity is measured by using a special device of Gottfert Rheograph 25 at various temperatures and pressures. Thermal conductivity is important in calculating all the heat transfer related behaviors of thermoplastic, including cooling time, temperature distribution…etc. Thermal conductivity is necessary for all Moldex3D analysis.
Heat Capacity
The heat capacity is measured by using a standard Differential Scanning Calorimeter, DSC (Model: Perkin Elmer DSC-8500). Heat capacity is as important as thermal conductivity in all the heat transfer related calculations. Heat capacity is necessary for all Moldex3D analyses.
Thermoset
Chemorheology
The chemorheology is a study of the reactive viscosity at various time, temperature and shear rates. CoreTech has developed a proprietary characterisation technique by using a parallel-plate rheometer (Model: Anton Paar MCR502). Chemorheology is crucial is calculating sprue pressure, melt front advancement, clamping force…etc. Chemorheology is necessary for all Moldex3D RIM analyses. Chemorheology of ultra low viscosity two-liquid type thermoset is available upon special request.
Curing Kinetics
The curing kinetics is a study of the curing rate at various time and temperature. CoreTech has developed a proprietary characterisation technique by using a standard Differential Scanning Calorimeter, DSC (Model: Perkin Elmer DSC-8500). This measurement is crucial to calculating sprue pressure, melt front advancement, clamping force…etc. Curing kinetics is necessary for all Moldex3D RIM analyses.
Characterisation Report
All the raw data, material model constants and Moldex3D material data file will be provided with the final report.
The PVT data is measured by a dedicated instrument (Model: Gotech PVT-6000) at various temperatures and pressures. PVT data is necessary in calculating volumetric shrinkage of the material. PVT is necessary for Pack and Warp analyses, and is good to have for Flow and Cool analysis.
